A bumper is a structure attached to or integrated with the front and rear ends of a motor vehicle, to absorb impact in a minor collision, ideally minimizing repair costs. Stiff metal bumpers appeared on automobiles as early as 1904 that had a mainly ornamental function. Numerous developments, improvements in materials and technologies, as well as greater focus on functionality for protecting vehicle components and improving safety have changed bumpers over the years. Bumpers ideally minimize height mismatches between vehicles and protect pedestrians from injury. Regulatory measures have been enacted to reduce vehicle repair costs and, more recently, impact on pedestrians.
Bumpers were at first just rigid metal bars. George Albert Lyon invented the earliest car bumper. The first bumper appeared on a vehicle in 1897, and it was installed by Nesselsdorfer Wagenbau-Fabriksgesellschaft, a Czech carmaker. The construction of these bumpers was not reliable as they featured only a cosmetic function. Early car owners had the front spring hanger bolt replaced with ones long enough to be able to attach a metal bar. G.D. Fisher patented a bumper bracket to simplify the attachment of the accessory. The first bumper designed to absorb impacts appeared in 1901. It was made of rubber and Frederick Simms gained patent for this invention in 1905.
Bumpers were added by automakers in the mid-1910s, but consisted of a strip of steel across the front and back. Often treated as an optional accessory, bumpers became more and more common in the 1920s as automobile designers made them more complex and substantial. Over the next decades, chrome-plated bumpers became heavy, elaborative, and increasingly decorative until the late 1950s when US automakers began establishing new bumper trends and brand-specific designs. The 1960s saw the use of lighter chrome-plated blade-like bumpers with a painted metal valance filling the space below it. Multi-piece construction became the norm as automakers incorporated grilles, lighting, and even rear exhaust into the bumpers.
On the 1968 Pontiac GTO, General Motors incorporated an "Endura" body-colored plastic front bumper designed to absorb low-speed impact without permanent deformation. It was featured in a TV advertisement with John DeLorean hitting the bumper with a sledgehammer and no damage resulted. Similar elastomeric bumpers were available on the front and rear of the 1970-71 Plymouth Barracuda. In 1971, Renault introduced a plastic bumper (sheet moulding compound) on the Renault 5.
Current design practice is for the bumper structure on modern automobiles to consist of a plastic cover over a reinforcement bar made of steel, aluminum, fiberglass composite, or plastic. Bumpers of most modern automobiles have been made of a combination of polycarbonate (PC) and acrylonitrile butadiene styrene (ABS) called PC/ABS.
Bumpers offer protection to other vehicle components by dissipating the kinetic energy generated by an impact. This energy is a function of vehicle mass and velocity squared. The kinetic energy is equal to 1/2 the product of the mass and the square of the speed. In formula form:
A bumper that protects vehicle components from damage at 5 miles per hour must be four times stronger than a bumper that protects at 2.5 miles per hour, with the collision energy dissipation concentrated at the extreme front and rear of the vehicle. Small increases in bumper protection can lead to weight gain and loss of fuel efficiency.
Until 1959, such rigidity was seen as beneficial to occupant safety among automotive engineers. Modern theories of vehicle crashworthiness point in the opposite direction, towards vehicles that crumple progressively. A completely rigid vehicle might have excellent bumper protection for vehicle components, but would offer poor occupant safety.
Bumpers are increasingly being designed to mitigate injury to pedestrians struck by cars, such as through the use of bumper covers made of flexible materials. Front bumpers, especially, have been lowered and made of softer materials, such as foams and crushable plastics, to reduce the severity of impact on legs.
For passenger cars, the height and placement of bumpers is legally specified under both US and EU regulations. Bumpers do not protect against moderate speed collisions, because during emergency braking, suspension changes the pitch of each vehicle, so bumpers can bypass each other when the vehicles collide. Preventing override and underride can be accomplished by extremely tall bumper surfaces. Active suspension is another solution to keeping the vehicle level.
Bumper height from the roadway surface is important in engaging other protective systems. Airbag deployment sensors typically do not trigger until contact with an obstruction, and it is important that front bumpers be the first parts of a vehicle to make contact in the event of a frontal collision, to leave sufficient time to inflate the protective cushions.
Energy-absorbing crush zones are completely ineffective if they are physically bypassed; an extreme example of this occurs when the elevated platform of a tractor-trailer completely misses the front bumper of a passenger car, and the first contact is with the glass windshield of the passenger compartment.
Truck vs. car
Underride collisions, in which a smaller vehicle such as a passenger sedan slides under a larger vehicle such as a tractor-trailer often result in severe injuries or fatalities. The platform bed of a typical tractor-trailer is at the head height of seated adults in a typical passenger car, and can cause severe head trauma in even a moderate-speed collision. Around 500 people are killed this way in the United States annually.
Following the June 1967 death of actress Jayne Mansfield in an auto/truck accident, the U.S. National Highway Traffic Safety Administration recommended requiring a rear underride guard, also known as a "Mansfield bar", an "ICC bar", or a "DOT (Department of Transportation) bumper". These may not be more than 22 in (56 cm) from the road. The U.S. trucking industry has been slow to upgrade this safety feature, and there are no requirements to repair ICC bars damaged in service. However, in 1996 NHTSA upgraded the requirements for the rear underride prevention structure on truck trailers, and Transport Canada went further with an even more stringent requirement for energy-absorbing rear underride guards. In July 2015, NHTSA issued a proposal to upgrade the U.S. performance requirements for underride guards.
Many European nations have also required side underride guards, to mitigate against lethal collisions where the car impacts the truck from the side. A variety of different types of side underride guards of this nature are in use in Japan, the US, and Canada. However, they are not required in the United States.
UN Regulation 58 sets forth requirements for rear underrun protective devices (RUPDs) and their installation, among which is that trucks and trailers of various types must have such devices with height above the ground not more than 45 cm (17.7 in), 50 cm (19.7 in), or 55 cm (21.7 in).
SUV vs. car
Mismatches between SUV bumper heights and passenger car side impact beams have allowed serious injuries at relatively low speeds. In the United States, NHTSA is studying how to address this issue as of 2014[update].
Beyond lethal interactions, repair costs of passenger car/SUV collisions can also be significant due to the height mismatch. This mismatch can result in vehicles being so severely damaged that they are inoperable after low speed collisions.
In most jurisdictions, bumpers are legally required on all vehicles. Regulations for automobile bumpers have been implemented for two reasons – to allow the car to sustain a low-speed impact without damage to the vehicle's safety systems, and to protect pedestrians from injury. These requirements are in conflict: bumpers that withstand impact well and minimize repair costs tend to injure pedestrians more, while pedestrian-friendly bumpers tend to have higher repair costs.
Although a vehicle's bumper systems are designed to absorb the energy of low-speed collisions and help protect the car's safety and other expensive components located nearby, most bumpers are designed to meet only the minimum regulatory standards.
International safety regulations, originally devised as European standards under the auspices of the United Nations, have now been adopted by most countries outside North America. These specify that a car's safety systems must still function normally after a straight-on pendulum or moving-barrier impact of 4 km/h (2.5 mph) to the front and the rear, and to the front and rear corners of 2.5 km/h (1.6 mph) at 45.5 cm (18 in) above the ground with the vehicle loaded or unloaded.
Specialized bumpers, known as "bull bars" or "roo bars", protect vehicles in rural environments from collisions with large animals. However, studies have shown that such bars increase the threat of death and serious injury to pedestrians in urban environments, because the bull bar is rigid and transmits all force of a collision to the pedestrian, unlike a bumper, which absorbs some force and crumples. In the European Union, the sale of rigid metal bull bars that do not comply with the relevant pedestrian-protection safety standards has been banned.
Off-road vehicles often utilize aftermarket off-road bumpers made of heavy gauge metal to improve clearance (height above terrain), maximize departure angles, clear larger tires, and ensure additional protection. Similar or identical to bull bars, off-road bumpers feature a rigid construction and do not absorb (by plastic deformation) any energy in a collision, which is more dangerous for pedestrians than factory plastic bumpers. The legality of the aftermarket off-road bumpers varies by jurisdiction.
Bumper regulations in the United States focus on preventing low-speed accidents from impairing safe vehicle operation, limiting damage to safety-related vehicle components, and containing the costs of repair after a crash.
First standards 1971
|Front and rear bumpers on Chrysler A platform cars before (left, 1971) and after (right, 1974) the U.S. 5-mph bumper standard took effect. The 1974 bumpers protroude farther from the body and the rear one no longer contains the taillamps.|
In 1971, the U.S. National Highway Traffic Safety Administration (NHTSA) issued the country's first regulation applicable to passenger car bumpers. Federal Motor Vehicle Safety Standard No. 215 (FMVSS 215), "Exterior Protection," took effect on 1 September 1972—when most automakers would begin producing their model year 1973 vehicles. The standard prohibited functional damage to specified safety-related components such as headlamps and fuel system components when the vehicle is subjected to barrier crash tests at 5 miles per hour (8 km/h) for front and 2.5 mph (4 km/h) for rear bumper systems. The requirements effectively eliminated automobile bumper designs that featured integral automotive lighting components such as tail lamps.
In October 1972, the U.S. Congress enacted the Motor Vehicle Information and Cost Saving Act (MVICS), which required NHTSA to issue a bumper standard that yields the "maximum feasible reduction of cost to the public and to the consumer". Factors considered included the costs and benefits of implementation, the standard's effect on insurance costs and legal fees, savings in consumer time and inconvenience, as well as health and safety considerations. The 1973 model year passenger cars sold in the U.S. used a variety of designs. They ranged from non-dynamic versions with solid rubber guards, to "recoverable" designs with oil and nitrogen filled telescoping shock-absorbers.
The standards were further tightened for the 1974 model year passenger cars, with standardized height front and rear bumpers that could take angle impacts at 5-mile-per-hour (8 km/h) with no damage to the car's lights, safety equipment, and engine. There was no provision in the law for consumers to 'opt out' of this protection.
Regulatory effect on design
The regulations specified bumper performance; they did not prescribe any particular bumper design. Nevertheless, many cars for the U.S. market were equipped with bulky, massive, protruding bumpers to comply with the 5-mile-per-hour bumper standard in effect from 1973 to 1982. This often meant additional overall vehicle length, as well as new front and rear designs to incorporate the stronger energy absorbing bumpers, adding weight to the extremities of the vehicle. Passenger cars featured gap-concealing flexible filler panels between the bumpers and the car's bodywork causing them to have a "massive, blockish look". However, other bumper designs also met the requirements. The 1973 AMC Matador coupe had free-standing bumpers with rubber gaiters alone to conceal the retractable shock absorbers. "Endura" bumpers, compliant with the regulations yet tightly integrated into the front bodywork, were used on models such as the Pontiac Grand Am starting in 1973, and the Chevrolet Monte Carlo starting in 1978, with significantly lower mass than heavy chromed-steel bumpers with separate impact energy absorbers.
|United States (left) and rest-of-world (right)|
|Front bumpers on Mercedes-Benz W116 (top), BMW E28 5 Series (middle), Lamborghini Countach (bottom). The U.S. bumpers are larger and protrude farther from the bodywork.|
The bumper regulations applied to all passenger cars, both American-made and imported. With exceptions including the Volvo 240, Porsche 911, and Rolls-Royce Silver Shadow, European and Asian automakers tended to put compliant bumpers only on cars destined for the U.S. and Canadian markets where the regulations applied. This meant their North American-spec cars tended to look different than versions of the same model sold elsewhere.
U.S. bumper-height requirements effectively made some models, such as the Citroën SM, ineligible for importation to the United States. Unlike international safety regulations, U.S. regulations were written without provision for hydropneumatic suspension.
Zero-damage standards 1976
The requirements promulgated under MVICS were consolidated with the requirements of Federal Motor Vehicle Safety Standard Number 215 (FMVSS 215, "Exterior Protection of Vehicles") and promulgated in March 1976. This new bumper standard was placed in the United States Code of Federal Regulations at 49 CFR 581, separate from the Federal Motor Vehicle Safety Standards at 49CFR571. The new requirements, applicable to 1979-model year passenger cars, were called the "Phase I" standard. At the same time, a zero-damage requirement, "Phase II", was enacted for bumper systems on 1980 and newer cars. The most rigorous requirements applied to 1980 through 1982 model vehicles; 5 miles per hour (8 km/h) front and rear barrier and pendulum crash tests were required, and no damage was allowed to the bumper beyond a 3⁄8 in (10 mm) dent and 3⁄4 in (19 mm) displacement from the bumper's original position.
Stringency reduced in 1982
As discussed in detail under Physics, prior to 1959, people believed the stronger the structure, including the bumpers, the safer the car. Later analysis led to the understanding of crumple zones, rather than rigid construction that proved deadly to passengers, because the force from impact went straight inside the vehicle and onto the passenger.
NHTSA amended the bumper standard in May 1982, halving the front and rear crash test speeds for 1983 and newer car bumpers from 5 miles per hour (8 km/h) to 2.5 miles per hour (4 km/h), and the corner crash test speeds from 3 miles per hour (5 km/h) to 1.5 miles per hour (2 km/h). In addition, the zero-damage Phase II requirement was rolled back to the damage allowances of Phase I. At the same time, a passenger car bumper height requirement of 16 to 20 inches (41–51 cm) was established for passenger cars.
NHTSA evaluated the results of its change in 1987, noting it resulted in lower weight and manufacturing costs, offset by higher repair costs.
Despite these findings, consumer and insurance groups both decried the weakened bumper standard. They presented the argument that the 1982 standard increased overall consumer costs without any attendant benefits except to automakers. In 1986, Consumers Union petitioned NHTSA to return to the Phase II standard and disclose bumper strength information to consumers. In 1990, NHTSA rejected that petition.
A market failure is created when consumers do not have the information to choose autos based on better/worse repair costs. In the United States, this gap is helped by the Insurance Institute for Highway Safety, which subjects vehicles to low-speed barrier tests (6 mph or 9.7 km/h) and publicizes the repair costs. Car makers that do well in these tests will publicize them.
As an example, in 1990 the Insurance Institute for Highway Safety conducted four crash tests on three different-year examples of the Plymouth Horizon. The results illustrated the effect of the changes to the US bumper regulations (repair costs quoted in 1990 United States dollars):
- 1983 Horizon with Phase-II 5-mph bumpers: $287
- 1983 Horizon with Phase-I 2.5-mph bumpers: $918
- 1990 Horizon: $1,476
Canada's bumper standard, first enacted at the same time as that of the United States, was generally similar to the 8 km/h (5 mph) US regulation. Canada mirrored U.S. design legislation in this area, but did not revise it to 4 km/h (2.5 mph) based on the 1982 cost-benefit analysis.
Some automakers chose to provide stronger Canadian-specification bumpers throughout the North American market, while others chose to provide weaker bumpers in the U.S. market, another hindrance to private importation of vehicles between the US and Canada.
In early 2009, Canada's regulation shifted to harmonize with US Federal standards and international ECE regulations. As in the U.S., consumer protection groups were upset with the change, while Canadian regulators maintained that the 4 km/h (2.5 mph) test speed is used worldwide and is more compatible with improved pedestrian protection in vehicle-pedestrian crashes.
|Wikimedia Commons has media related to Bumpers.|
- Helps, Ian G. (2001). Plastics in European cars, 2000 - 2008. Shawbury RAPRA Technology. p. 99. ISBN 9781859572344. Retrieved 15 March 2014.
- "Bumper Development". Automobile Trade Journal. 29 (6): 301. 1 December 1924. Retrieved 20 July 2018.
- "The 1910 Harroun Bumper". Cycle and Automobile Trade Journal, Volume 14. 1909. p. 142. Retrieved 21 June 2016.
- Hodges, David (1994). The Guinness Book of Car Facts and Feats. England: Guinness Publishing. p. 256. ISBN 0851127681.
- Davis, Dar (21 November 2010). "The evolution of bumpers". The Herald Palladium. Retrieved 20 July 2018.
- Strohl, Daniel (July 2006). "Endura Front Bumper The bounce-back bumper that freed automotive styling". Hemmings Motor News. Retrieved 20 July 2018.
- Genat, Robert (2005). Challenger And 'Cuda: Mopar's E-Body Muscle Cars. MBI Publishing. p. 58. ISBN 9780760318645. Retrieved 20 July 2018.
- Maxwell, James (31 March 1994). Plastics in the Automotive Industry. Cambridge: Woodhead publishing limited. p. 107. ISBN 9781845698645. Retrieved 21 June 2016.
- "Bumpers". Insurance Institute for Highway Safety, Highway Loss Data Institute. Retrieved 15 March 2014.
- Kashinath, Kusekar Sambhaji; Balasaheb, Chunge Abhijit (February 2014). "Review of Design & Analysis of Bumper Beam In Low Speed Frontal Crashes" (PDF). International Journal of Industrial Electronics and Electrical Engineering. 2 (2): 27–34. ISSN 2347-6982. Retrieved 20 July 2018.
- "Physics in the Crumple Zone Demonstrate How Less Stiff Materials, Like Plastic, Can Help Prevent Injury and Save Lives". Automotive Plastics. Retrieved 21 June 2016.
- Raiciu, Tudor (18 October 2017). "How Crumple Zones Work". autoevolution.com. Retrieved 20 July 2018.
- Evans, Leonard (2004). "11 Occupant protection". scienceservingsociety.com. Retrieved 20 July 2018.
The reduction in speed divided by the time over which it takes place defines deceleration. Injury-producing forces are proportional to the deceleration experienced by the occupant. Occupant protection aims at reducing these forces by spreading the occupant's changes in speed over longer times. The theoretical best protection would be for the occupant to slow down from the initial vehicle speed to zero speed at a constant deceleration using the entire distance between the occupant's body and the vehicle's point of impact. In the previous example of an initial speed of 50 km/h, and assuming the driver is seated 2.5 m behind the front bumper, the resulting average deceleration would be 4 G, uncomfortable but unlikely to produce even a minor injury.
- Rogers, Christina (23 April 2012). "European safety-styled cars due in U.S". Automotive News. Retrieved 2 July 2015.
- "Bumpers on 4 of 6 midsize sedans improve; none earns good rating in low-speed tests". Insurance Institute for Highway Safety. 6 August 2009. Retrieved 12 April 2017.
- "Getting Started". Underride Network. Underride Network. Retrieved 7 June 2014.
- Bloch, Byron. "Truck Underride Hazards". autosafetyexpert.com. Retrieved 20 July 2018.
- "Underride Guard". Everything2. Retrieved 29 November 2007.
- United States Congressional Committee on Commerce (1997). Reauthorization of the National Highway Traffic Safety Administration. p. 39.
- "Failure Analysis of an ICC Underride Bar - Mobile, Alabama". www.metalconsult.com.
- Berg, Tom (17 January 2012). "Are Underride Guards Good Enough?". www.truckinginfo.com. Retrieved 20 September 2020.
- Cullen, David (20 July 2015). "NHTSA to Upgrade Truck Underride and Conspicuity Rules". www.truckinginfo.com. Retrieved 20 September 2020.
- Berg, Tom (20 January 2012). "Underride guards in Japan look weaker but cover more area than here". www.truckinginfo.com. Retrieved 20 September 2020.
- "AgreementConcerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and the Conditions for Reciprocal Recognition of Approvals Granted on the Basis of these United Nations Regulations" (PDF). United Nations. 30 November 2017. Retrieved 20 September 2020.
UN Regulation No. 58: Uniform provisions concerning the approval of  Rear underrun protective devices (RUPDs) [II] Vehicles with regard to the installation of an RUPD of an approved type [III ]Vehicles with regard to their rear underrun protection (RUP)]
- "Light trucks need bumper rules too".
- "NHTSA bumper Q&A". Nhtsa.gov. Retrieved 6 January 2014.
- "SUV fender-benders can lead to costly repairs". News OK. Associated Press. 2 December 2010. Retrieved 2 July 2015.
- "Incompatible Bumpers Raise Repair Costs". Road and Track. 6 November 2012. Retrieved 2 July 2015.
- Shuler, S.; Mooijman, F.; Nanda, A. (8 March 2004). "Bumper Systems Designed for Both Pedestrian Protection and FMVSS Requirements: Part Design and Testing". SAE Technical Paper Series. 1. SAE International. doi:10.4271/2004-01-1610. Retrieved 2 July 2015.
- Elmarakbi, Ahmed (2014). Advanced composite materials for automotive applications: structural integrity and crashworthiness. Wiley. p. 130. ISBN 9781118535271. Retrieved 15 March 2014.
- "United Nations ECE Regulation No. 42: Uniform Provisions Concerning the Approval of Vehicles With Regard to Their Front and Rear Protective Devices (Bumpers, etc.)" (PDF). 1 June 1980. Retrieved 6 January 2014.
- "DfT Research: A Study of Accidents Involving Bull Bar Equipped Vehicles". Rmd.dft.gov.uk. 1 April 2001. Archived from the original on 12 June 2007. Retrieved 13 November 2011.
- "Directive 2005/66/EC of the European Parliament and of the Council of 26 October 2005 relating to the use of frontal protection systems on motor vehicles and amending Council Directive 70/156/EEC". eur-lex.europa.eu. 26 October 2005. Retrieved 20 September 2020.
- Abramson, Paul; Stein, Howard; et al. (1982). "Analysis of the Effectiveness of Bumper Standard FMVSS 215". Transportation Research Record. 844: 12.
- Canada Gazette Part I (PDF), 142, 22 March 2008, p. 823, retrieved 12 July 2020,
The intention of the current U.S. bumper standard is to reduce damage to the bumper system and thus provide American consumers with a lower bumper damage replacement and repair cost, while also maintaining the integrity of the safety systems.
- Solomon, Jack (March 1978). "Billion Dollar Bumpers". Reason.
- La Heist, Warren G.; Ephraim, Frank G. "An Evaluation of the Bumper Standard - As Modified in 1982 - NHTSA Report Number DOT HS 807 072". Webcitation.org. Archived from the original on 4 March 2009. Retrieved 6 January 2014.
- "Congressional Record—Extension of Remarks" (PDF).[dead link] (20.1 KB)
- Lamm, Michael (October 1972). "AMC: Hornet hatchback leads the lineup". Popular Mechanics. 138 (4): 118–202. Retrieved 6 January 2014.
- James M. Flammang and the auto editors of Consumer Guide (2000). Cars of the Sensational '70s: A Decade of Changing Tastes and New Directions. Publications International. ISBN 0-7853-2980-3.
- Norbye, Jan P. (October 1973). "New bumpers have uniform height, take angle impacts". Popular Science. 203 (4): 90–91. Retrieved 6 January 2014.
- Cranswick, Marc (2011). The Cars of American Motors: An Illustrated History. McFarland. p. 209. ISBN 978-0-7864-4672-8. Retrieved 6 January 2014.
- Pontiac's Grand Experiment
- [guidelamp.net/InsideGuide.pdf Inside Guide: Building That Plastic Bumper]
- Clément-Collin, Paul (16 May 2015). "Citroën SM: la chute de "Sa Majesté"" [Citroën SM: "Her Majesty's" fall] (in French). Boitier Rouge. Archived from the original on 19 August 2015.
But in 1974, everything changed: new American regulations imposed new bumpers, and made it almost impossible to market a car with variable suspension height without heavy and very expensive technical modifications. Citroën had to throw in the towel in the United States after hoping in vain for a waiver.
- La Heist, Warren G.; Ephraim, Frank G. (February 1987). "An Evaluation of the Bumper Standard - As Modified in 1982 - NHTSA Report Number DOT HS 807 072". Nhtsa.dot.gov. Archived from the original on 13 April 2009. Retrieved 2 July 2015.
- Insurance Facts. Insurance Information Institute. 1980. p. 61. Retrieved 6 January 2014.
- Shabekoff, Philip (7 November 1981). "Reagan Order on Cost-benefit Analysis Stirs Economic and Political Debate". The New York Times. Retrieved 21 June 2016.
- "An Evaluation of the Bumper Standard". www.nhtsa.gov.
- Warren G. La Heist and Frank G. Ephraim (February 1987). "An Evaluation of the Bumper Standard - As Modified in 1982". NHTSA Report Number DOT HS 807 072. Retrieved 21 June 2016.
- "IIHS Highway Loss Reduction Status Report - 6 October 1981" (PDF). (2.49 MB)
- "IIHS Highway Loss Reduction Status Report - 24 May 1982" (PDF). (939 KB)
- Jensen, Cheryl (21 November 1999). "Bumpers Cave In to the Bump and Grind". The New York Times. Retrieved 6 January 2014.
- "Consumer Bumper Quality Disclosure Bill". SmartMotorist.com. Archived from the original on 7 January 2014. Retrieved 6 January 2014.
- "Bumper evaluation program". Iihs.org. Archived from the original on 2 July 2015. Retrieved 2 July 2015.
- O'dell, John (10 July 2010). "3 of 4 Small SUVs Are Rated 'Poor' for Crash Repair". Los Angeles Times. Retrieved 2 July 2015.
- "Cars you can't buy here". Popular Mechanics. September 1984. p. 61. Retrieved 12 April 2017.
- "Motor Vehicle Safety Regulations (C.R.C., c. 1038)". Transport Canada. 6 November 2019. Retrieved 20 September 2020.
- "Canada to harmonize bumper standard with U.S., Europe". Autos Canada. 2 April 2008. Retrieved 6 January 2014.
- "Canada Safety Council: Canada Loosens Bumper Standard To Align With U.S." Safety-council.org. Retrieved 6 January 2014.
- Viscusi, Kip (1988). "Regulatory Economics in the Courts: an Analysis of Judge Scalia's NHTSA Bumper Decision". Law and Contemporary Problems. 50 (4). Retrieved 2 July 2015.
- Claybrook Joan Claybrook's defense of her tenure at NHTSA against Government failure comments by Supreme Court Justice Stephen Breyer, Joan. "Criticism Run Amok" (PDF). Retrieved 7 July 2015.