Spirit River Formation
|Spirit River Formation|
Stratigraphic range: middle Albian
Falher graywake and shale
|Unit of||Fort St. John Group|
|Sub-units||Notikewin Member, Falher Member, Wilrich Member|
|Underlies||Peace River Formation|
|Thickness||up to 348 feet (110 m)|
|Primary||sandstone, shale, siltstone|
|Other||coal, ironstone, greywacke|
|Region||Alberta, British Columbia|
|Named for||Spirit River|
|Named by||Badgley, 1952|
The Spirit River Formation consists, from bottom to top of fine to medium grained argillaceous sandstone, dark shale, ironstone, greywacke, shale, siltstone, coal and dark shale with thin sandstone and siltstone stringers.
Hydraulic fracturing in Canada
'Massive' hydraulic fracturing has been widely used in Alberta since the late 1970s to recover gas from low-permeability sandstones of the Spirit River Formation.:1044 Massive hydraulic fracturing has been widely used in Alberta since the late 1970s. The method is currently used in development of the Cardium, Duvernay, Montney and Viking formations in Alberta, Bakken formation in Saskatchewan, Montney and Horn River formations in British Columbia.
The Spirit River Formation reaches a maximum thickness of 348 metres (1,140 ft). It is found in the sub-surface in the Peace River Country, in an area stretching from Fort St. John, British Columbia to the Lesser Slave Lake from west to east, and from Grande Prairie, Alberta to Manning, Alberta from south to north.
Relationship to other units
The Spirit River Formation is conformably overlain by the Peace River Formation and conformably underlain by the Bluesky Formation. It grades laterally to the Buckinghorse Formation shales to the north-east, and into the sandy facies of the Malcolm Creek Formation south of the Wapiti River. It is equivalent to the upper Mannville Formation in Central Alberta and to the Clearwater Formation and Grand Rapids Formation in the upper Athabaska River area.
The Spirit River Formation is composed of the following sub-divisions from base to top:
|Notikewin Member||fine to medium grained argillaceous sandstone, dark shale, ironstone||28 metres (90 ft)|||
|Falher Member||greywacke, shale, siltstone, coal||215 metres (710 ft)|||
|Wilrich Member||dark shales thin sandstone and siltstone stringers||154 metres (510 ft)|||
- Lexicon of Canadian Geologic Units. "Peace River Formation". Retrieved 2009-02-11.
- Badgley, Peter C., 1952. Notes on the subsurface stratigraphy and oil and gas geology of the Lower Cretaceous series in central Alberta (Report and seven figures); Geological Survey of Canada, Paper No. 52-11, 12 p.
- Cant, Douglas J.; Ethier, Valerie G. (August 1984), "Lithology-dependent diagenetic control of reservoir properties of conglomerates, Falher member, Elmworth Field, Alberta", Bulletin of the American Association of Petroleum Geologists, 68 (8)
- Lexicon of Canadian Geologic Units. "Notikewin Member". Retrieved 2009-02-11.
- Lexicon of Canadian Geologic Units. "Falher Member". Retrieved 2009-02-11.
- Lexicon of Canadian Geologic Units. "Wilrich Member". Retrieved 2009-02-11.
|This article about a specific stratigraphic formation in Canada is a stub. You can help Wikipedia by expanding it.|