# Thin lens

In optics, a **thin lens** is a lens with a thickness (distance along the optical axis between the two surfaces of the lens) that is negligible compared to the radii of curvature of the lens surfaces. Lenses whose thickness is not negligible are sometimes called *thick lenses*.

The **thin lens approximation** ignores optical effects due to the thickness of lenses and simplifies ray tracing calculations. It is often combined with the paraxial approximation in techniques such as ray transfer matrix analysis.

## Focal length[edit]

The focal length, *f*, of a lens in air is given by the lensmaker's equation:

where *n* is the index of refraction of the lens material, and *R*_{1} and *R*_{2} are the radii of curvature of the two surfaces. For a thin lens, *d* is much smaller than one of the radii of curvature (either *R*_{1} or *R*_{2}). In these conditions, the last term of the Lensmaker's equation becomes negligible, and the focal length of a thin lens in air can be approximated by^{[1]}

Here *R*_{1} is taken to be positive if the first surface is convex, and negative if the surface is concave. The signs are reversed for the back surface of the lens: *R*_{2} is positive if the surface is concave, and negative if it is convex. This is an arbitrary sign convention; some authors choose different signs for the radii, which changes the equation for the focal length.

## Image formation[edit]

Certain rays follow simple rules when passing through a thin lens, in the paraxial ray approximation:

- Any ray that enters parallel to the axis on one side of the lens proceeds towards the focal point F on the other side.
- Any ray that arrives at the lens after passing through the focal point on the front side, comes out parallel to the axis on the other side.
- Any ray that passes through the center of the lens will not change its direction.

By tracing these rays, the relationship between the object distance *s* and the image distance *s′* can be shown to be

- ,

which is known as the **thin lens equation**.

## Physical optics[edit]

In scalar wave optics a lens is a part which shifts the phase of the wave-front. Mathematically this can be understood as a multiplication of the wave-front with the following function:^{[2]}

- .

## References[edit]

**^**Hecht, Eugene (1987).*Optics*(2nd ed.). Addison Wesley. § 5.2.3. ISBN 0-201-11609-X.**^**Saleh, B.E.A. (2007).*Fundamentals of Photonics*(2nd ed.). Wiley.